Easy methods to distinguish the true and also false of insulati


  • With the development belonging to the domestic glass processing industry and the deepening of people's perception of the excellent performance of insulating glass, the use range of insulating magnifying glaas is expanding. In addition to being widely used in glass curtain outlet, automobile and aircraft, there are begun to enter the particular ordinary. The home of the people.

    This is mainly because the application of insulating glass can improve the heat insulation and sound insulation effect of doors and windows, so that this door and window products not simply can shelter from wind and rain, but also have significant energy-saving effects, reducing the buying price of winter heating and summertime cooling.
    The application of insulating glass is consistently expanding, and the quality requirements of insulating glass are getting higher and higher. Easy methods to grasp the development opportunities in the market and provide top quality and reliable Laminated wire glass became the research problems of insulating glass manufacturers.

    Every hollow glass is required to be heavily tested and strictly checked to form the finished product.
    First introduce the sorts of insulating glass and five indicators inside the national standard for insulating glass:

    First, the distinction:

    1. Slotted aluminum hollow tumbler: This kind of insulating glass was introduced in the 1980s, which is somewhat mature, but the processing technology is more complicated.

    2, aluminum strip hollow cup: This kind of insulating glass started late in london, but the manufacturing method is simple, so the approval range is wide, as well as the promotion is very quickly.
    Two or five signs:

    1. Initial dew issue

    2, sealing test

    SEVERAL, ultraviolet radiation

    4, excessive temperature and high humidity

    5. Climate cycle check

    According to the country wide testing standards, how to arrange our production in order to reach the requirements of insulating glass? Since the two varieties of insulating glass have many similarities along the way flow, they now evaluate their common process circulation.

    1, glass cutting plus cutting

    The original glass is mostly colorless float glass or other colored glass, sunshade goblet, tempered glass, laminated cup, the thickness is typically 3-12MM, the above glass must meet certain requirements of the new normal GB11614 flat glass, the first-class product, It can be used after passing the inspection.

    Glass cutting can be done by hand or machine, but it must be guaranteed to meet the type requirements. During the operation of the process, workers should focus on the surface of your glass without scratches, the internal quality is even, and there should become no obvious defects including bubbles and slag inclusions.
    3, glass cleaning and drying out

    Glass cleaning must develop machine cleaning method, because manual cleaning can not guarantee the caliber of cleaning.

    It is essential inspect the glass without having scratches before cleaning. To confirm the adhesion of the sealant into the glass, it is best make use of deionized water. In supplement, in order to ensure the use of water recycling, water efficiency, water can be filtered to make certain long-term use.

    The cleaned glass must pass the light inspection to evaluate the glass surface using waterless beads, water stains and other stains. If there will be water drops, water stains and also other stains, the machine operating speed, heating temperature, air volume and brush gap need to be checked. Adjust until the effect is intact.

    Following washing, the glass ought to be assembled into insulating glass within An hour. In addition, it is necessary so there is no abrasion and scratch between the glass as well as the glass. It is preferable to obtain a semi-finished glass storage trolley to part ways the glass sheet in the sheet.
    3. Assembly of aluminum strip insulating cup

    (1) Environmental requirements: The temperature ought to be between 10-30 degrees.

    (2) Family member humidity requirements: The specifications for relative humidity of such insulating glass usually are slightly lower, and usual conditions are sufficient.

    Even so, it should be noted that this desiccant should be preferred from qualified manufacturers to confirm the effective use of desiccant.

    After the desiccant can be opened, it is best make use of it within 24 time. Because the polysulfide rubber has high gas permeability and also poor sealing, it is important to use a two times seal.

    The butyl rubber is used as the first close up to block the energy.

    The two-component glue is used as the second seal, the main function is a bonding effect, and your second is the gas hurdle effect.

    Practice has proved the fact that life of a single-sealed insulating glass is just about 5 years, and the life of your double-sealed insulating glass can be so long as 20 years or actually 40 years. Therefore, the development of double-channel sealed insulating glass is a trend of the situations.

    4, glass splicing

    Aluminum strip type hollow magnifying glaas. After the splicing, the outer edge in the aluminum frame and the advantage of the glass needs to have a distance of 5-7MM. It truly is used to apply cost-free sealant. The two-component adhesive should be evenly coated along one side to prevent air bubbles. After shell, scrape off the surface with the glass.

    This completes the particular processing of aluminum strip insulating glass.
    5, the keeping insulating glass

    The correct keeping of the insulating glass will likely have an impact around the final quality of the actual insulating glass, whether throughout production or in transit or even on site.
    In order upskill the effect of insulation and insulating the insulation glass, many manufacturers now inject inert gas on the hollow glass by taking out the air in the actual insulating glass, and such a process further improves the performance from the insulating glass.

    Tips

    Some of the most important methods with counterfeiting hollow glass:

    A SINGLE. Replace tempered glass having ordinary glass

    2, change the aluminum alloy spacer using ordinary double-sided adhesive remove

    3. No desiccant is added to the aluminum alloy spacer

    FOUR, only do a solo seal without double closure

    5, replace the bimolecular adhesive by using ordinary sealant

    First of, the design requirements from the stacking truss should consider the characteristics of that insulating glass, and the stacking truss must have a certain inclination. However, the bottom plane and also the side should always possibly be maintained at 90 college diplomas, so that the a pair of glass bottom edges on the insulating glass can be placed vertically for the stacker.

    Also note that the bottom of the glass ought not be stained with oil, lime and other solvents, simply because will have different degrees of erosion on the second sealant belonging to the insulating glass, thus affecting the sealing performance from the insulating glass.